Trueness and precision of the reproduction of dental casts by the conventional, milling and 3D printing techniques / Fidelidade e precisão de modelos de trabalho reproduzidos pelas técnicas convencional, de fresagem e de impressão 3D

Objective: To compare the reproduction trueness and precision of dental casts made by the conventional, milling and 3D printing techniques. Material and Methods: From an upper right side half-arch reference model (RM), 72 models were obtained and divided into three groups: conventional (CM), milled (MM) and printed (PM). All models were scanned and converted into standard tessellation language (.STL) files. The files were superimposed using 3D analysis software, and statistical analysis was performed using the root mean square (RMS) values obtained. The Shapiro-Wilk test was used to assess normality, and the Kruskal-Wallis test was used to compare groups (ρ < ⍺; ⍺ = 0.05). The Mann-Whitney U test was used for multiple comparisons among groups (ρ < ਕ; ਕ = 0.017). Results: There were significant differences in trueness (ρ = 0.000; ρ <0.001) and precision (ρ = 0.000; ρ < 0.001) among the three dental cast groups. Regarding trueness, CM presented better results, followed by MM and PM. Regarding precision, MM showed better results, followed by PM and CM, which did not show significant differences. Conclusions: For dental cast reproduction the conventional technique has the best trueness and the milling technique has the best precision.(AU)

Objetivo: Comparar a fidelidade e precisão de reprodução de modelos de trabalho pelas técnicas convencional, de fresagem e de impressão 3D. Material e Métodos: A partir de um modelo de referência (MR) de uma hemi-arcada superior direita, foram obtidos 72 modelos divididos em três grupos: convencionais (MC), fresados (MF) e impressos (MI). Todos foram digitalizados e convertidos sob a forma de ficheiros .STL (standard tesselation language). Os ficheiros foram sobrepostos utilizando um software de análise 3D, e através dos valores RMS (raiz do valor quadrático médio) obtidos foi realizada a análise estatística. Para avaliação da normalidade foi utilizado o teste Shapiro Wilk e para a comparação entre grupos foi utilizado o teste Kruskal-Wallis (ρ < ⍺; ⍺ = 0.05). Para as comparações múltiplas entre grupos, foi utilizado o teste U de Mann-Whitney (ρ < ਕ; ਕ = 0.017). Resultados:Existem diferenças significativas de fidelidade (ρ = 0.000; ρ <0.001) e precisão (ρ = 0.000; ρ < 0.001) entre os três grupos. Em relação à fidelidade, MC apresentou melhores resultados, seguido por MF e MI. Em relação à precisão, MF apresentou melhores resultados, seguido por MI e MC, que não apresentaram diferenças significativas entre si. Conclusão: Para reprodução de modelos de trabalho, a técnica convencional é a que apresenta maior fidelidade e a técnica de fresagem a que apresenta maior precisão.(AU)

Evaluation of the alignment efficiency of nickel-titanium and copper-nickel-titanium archwires in patients undergoing orthodontic treatment over a 12-week period: A single-center, randomized controlled clinical trial / 대한치과교정학회지

OBJECTIVE: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. METHODS: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi (27℃) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. RESULTS: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week × diameter × application (p < 0.05). CONCLUSIONS: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

Forma y tamaño del arco dental en poblaciones de tres ascendencias étnicas colombianas / Form and size of the dental arch in populations of three Colombian ethnic ancestries

Introducción: En la actualidad existe poca referencia sobre la configuración de los arcos dentales en poblaciones latinoamericanas y se han descrito múltiples formas y variaciones para dichos arcos que se derivan especialmente de pacientes caucásicos. Objetivo: Describir la forma y tamaño de los arcos dentales de tres poblaciones Colombianas (Mestiza, Indígena, Afrodescendiente) en Condiciones de Normo Oclusión. Materiales y métodos: Estudio descriptivo transversal en 184 modelos distribuidos por la ascendencia étnica identificada a través de sus características morfológicas en 66 indígenas, 70 afrodescendientes y 48 mestizos con edades entre los 11 y 41 años de edad. Las variables estudiadas fueron distancia intercanina, distancia intermolar, longitud anterior del arco, perímetro de arco superior e inferior. Los modelos se fotocopiaron y luego se digitalizaron para posteriormente determinar la forma del arco mediante tres observadores. Resultados: La forma predominante en las 3 etnias es la ovalada. Existe baja concordancia entre la forma de arco maxilar y mandibular en un mismo individuo. Hubo una relación significativa entre la forma de arco superior cuadrada y el grupo étnico indígena. Se encontró diferencia significativa en la distancia intercanina superior en las tres formas de arcos. Conclusión: La forma de arco ovoide es la de mayor prevalencia en todos los grupos étnicos, se encontró una diferencia significativa en el ancho intercanino entre las formas del arco para el arco superior. Hubo una relación significativa entre la etnia indígena y la forma de arco superior cuadrada.

Introduction: At present there is little reference to the configuration of dental arches in Latin American populations and have been described many forms and variations for these arcs are derived especially from Caucasian patients. Objective: Describe the shape and size of the dental arches three Colombian populations (mestizo, indigenous, Afro-descendant) under occlusion Normo. Materials and methods: A cross over 184 models of study according to their racial characteristics and population were divided into 3 groups, 66 Indians, 70 and 48 mestizos African descent aged between 11 and 41 years old. The variables studied were intercanine width, intermolar distance, above the arc length, circumference of upper and lower arch. The photocopies of study models were scanned and subsequently determine the shape of the arc by three observers. Results: The predominant form in the three races is the oval. There is low correlation between maxillary and mandibular arch in the same individual. There was a significant relationship between the arc-shaped square top and Indian ethnicity. There was significant difference in the upper intercanine width between arch forms. Conclusion: The ovoid shaped arched is the most prevalent in all ethnic groups, a significant difference was found in the intercanine width between the arch shapes for the upper arch. There was a significant relationship between indigenous ethnicity and the shape of a square upper arch.

Reference points suitable for evaluation of the additional arch length required for leveling the curve of Spee / 대한치과교정학회지

OBJECTIVE: The additional arch length required for leveling (AALL) the curve of Spee (COS) can be estimated by subtracting the two-dimensional (2D) arch circumference, which is the projection of the three-dimensional (3D) arch circumference onto the occlusal plane, from the 3D arch circumference, which represents the arch length after leveling the COS. The purpose of this study was to determine whether the cusp tips or proximal maximum convexities are more appropriate reference points for estimating the AALL. METHODS: Sixteen model setups of the mandibular arch with COS depths ranging from 0 mm to 4.7 mm were constructed using digital simulation. Arch circumferences in 2D and 3D were measured from the cusp tips and proximal maximum convexities and used to calculate the AALL. The values obtained using the two reference points were compared with the paired t-test. RESULTS: Although the 3D arch circumference should be constant regardless of the COS depth, it decreased by 3.8 mm in cusp tip measurements and by 0.4 mm in proximal maximum convexity measurements as the COS deepened to 4.7 mm. AALL values calculated using the cusp tips as reference points were significantly smaller than those calculated using the proximal maximum convexities (p = 0.002). CONCLUSIONS: The AALL is underestimated when the cusp tips are used as measurement reference points; the AALL can be measured more accurately using the proximal maximum convexities.

A comparison of the precision of three-dimensional images acquired by 2 digital intraoral scanners: effects of tooth irregularity and scanning direction / 대한치과교정학회지

OBJECTIVE: The purpose of this study was to compare the precision of three-dimensional (3D) images acquired using iTero(R) (Align Technology Inc., San Jose, CA, USA) and Trios(R) (3Shape Dental Systems, Copenhagen, Denmark) digital intraoral scanners, and to evaluate the effects of the severity of tooth irregularities and scanning sequence on precision. METHODS: Dental arch models were fabricated with differing degrees of tooth irregularity and divided into 2 groups based on scanning sequence. To assess their precision, images were superimposed and an optimized superimposition algorithm was employed to measure any 3D deviation. The t-test, paired t-test, and one-way ANOVA were performed (p < 0.05) for statistical analysis. RESULTS: The iTero(R) and Trios(R) systems showed no statistically significant difference in precision among models with differing degrees of tooth irregularity. However, there were statistically significant differences in the precision of the 2 scanners when the starting points of scanning were different. The iTero(R) scanner (mean deviation, 29.84 +/- 12.08 microm) proved to be less precise than the Trios(R) scanner (22.17 +/- 4.47 microm). CONCLUSIONS: The precision of 3D images differed according to the degree of tooth irregularity, scanning sequence, and scanner type. However, from a clinical standpoint, both scanners were highly accurate regardless of the degree of tooth irregularity.

Accuracy of Bolton analysis measured in laser scanned digital models compared with plaster models (gold standard) and cone-beam computer tomography images / 대한치과교정학회지

OBJECTIVE: The aim of this study was to compare the accuracy of Bolton analysis obtained from digital models scanned with the Ortho Insight three-dimensional (3D) laser scanner system to those obtained from cone-beam computed tomography (CBCT) images and traditional plaster models. METHODS: CBCT scans and plaster models were obtained from 50 patients. Plaster models were scanned using the Ortho Insight 3D laser scanner; Bolton ratios were calculated with its software. CBCT scans were imported and analyzed using AVIZO software. Plaster models were measured with a digital caliper. Data were analyzed with descriptive statistics and the intraclass correlation coefficient (ICC). RESULTS: Anterior and overall Bolton ratios obtained by the three different modalities exhibited excellent agreement (> 0.970). The mean differences between the scanned digital models and physical models and between the CBCT images and scanned digital models for overall Bolton ratios were 0.41 +/- 0.305% and 0.45 +/- 0.456%, respectively; for anterior Bolton ratios, 0.59 +/- 0.520% and 1.01 +/- 0.780%, respectively. ICC results showed that intraexaminer error reliability was generally excellent (> 0.858 for all three diagnostic modalities), with < 1.45% discrepancy in the Bolton analysis. CONCLUSIONS: Laser scanned digital models are highly accurate compared to physical models and CBCT scans for assessing the spatial relationships of dental arches for orthodontic diagnosis.

Computerized occlusal analysis: correlation with occlusal indexes to assess the outcome of orthodontic treatment or the severity of malocculusion / 대한치과교정학회지

OBJECTIVE: The aims of our study were to verify the validity of the T-Scan III system (Tekscan) as an objective occlusal evaluation tool, and to assess the differences between two occlusal indexes-the peer assessment rating (PAR) index and the American Board of Orthodontics objective grading system (OGS)-by comparing the scores derived from the T-Scan III system with the two occlusal indexes and analyzing the correlations between them. METHODS: The final study sample included 48 adult volunteers (39 men and 9 women, mean age 24.14 +/- 3.16 years), after excluding 29 volunteers whose occlusion could not be evaluated by the T-Scan III system due to severe skeletal or occlusal problems. PAR index and OGS scores were assessed using dental study models, and measurements of centric occlusion, protrusive movement, and lateral excursion movement were obtained via the T-Scan III system. The results were analyzed to determine correlations. RESULTS: Occlusal analysis by the T-Scan III system was clinically reliable (p < 0.05), and the PAR index and OGS scores were significantly correlated with several measurements obtained with the T-Scan III system (p < 0.05). CONCLUSIONS: The T-Scan III system is a quantitative and reliable method for occlusal evaluation, and represents a potential substitute for occlusal indexes. Compared to the PAR index, the OGS scores of more variables were significantly correlated with the T-Scan measurements.

Differences in molar relationships and occlusal contact areas evaluated from the buccal and lingual aspects using 3-dimensional digital models / 대한치과교정학회지

OBJECTIVE: The aims of this study were to use a 3-dimensional (3D) system to compare molar relationship assessments performed from the buccal and lingual aspects, and to measure differences in occlusal contact areas between Class II and Class I molar relationships. METHODS: Study casts (232 pairs from 232 subjects, yielding a total of 380 sides) were evaluated from both the buccal and lingual aspects, so that molar relationships could be classified according to the scheme devised by Liu and Melsen. Occlusal contact areas were quantified using 3D digital models, which were generated through surface scanning of the study casts. RESULTS: A cusp-to-central fossa relationship was observed from the lingual aspect in the majority of cases classified from the buccal aspect as Class I (89.6%) or mild Class II (86.7%). However, severe Class II cases had lingual cusp-to-mesial triangular fossa or marginal ridge relationships. Mean occlusal contact areas were similar in the Class I and mild Class II groups, while the severe Class II group had significantly lower values than either of the other 2 groups (p < 0.05). CONCLUSIONS: Buccal and lingual assessments of molar relationships were not always consistent. Occlusal contact areas were lowest for the Class II-severe group, which seems to have the worst molar relationships - especially as seen from the lingual aspect.

A cephalometric and dental cast study of obstructive sleep apnea patients / 대한치과교정학회지

To evaluate the cephalometric and dental characteristics of obstructive sleep apnea (OSA) patients, 23 OSA patients and 15 control, non-OSA, patients who visited the Sleep Disorder Clinic Center, Keimyung University were investigated. Patients who suffered from apnea-hypopnea episodes over 10 times per hour were diagnosed as having OSA after polysomnograph testing. Impressions were taken with alginate. Cephalometric radiographs were taken at maximum intercuspation. The dental cast measurements, including transpalatal width, intercanine width, intermolar width and palatal depth did not differ between the control and OAS groups and did not have a positive correlation with the apnea-hypopnea index (AHI). Upper airway width was statistically narrower than the control group. Upper airway width had a low negative correlation with AHI, but, lower airway width had a low positive correlation, and, the higher the AHI score, the longer the mandibular border to hyoid distance.

Effects of extraction orthodontic treatment on the upper airway dimensions in young adult patients with malocclusion / 实用口腔医学杂志

Objective:To investigate the effects of extraction orthodontic treatment on the upper airway dimensions in young adult patients with malocclusion,and to evaluate the relationship between changes in the craniofacial morphology,position of incisor and upper airway dimensions.Methods:26 patients with upper and lower first premolar extraction and 21 patients without extraction were recruited.Cephalometry and dental cast analysis were performed pretreatment and posttreatment.Results:No statistical difference was found in the parameters of the upper airway dimensions in both non-extraction group and extraction group after treatment.In linear correlation analysis,SPAS was positively correlated with cephalometric variables U1-Y and L1-Y.MAS and IAS was positively correlated with cephalometric variables SNB,U1-Y and L1-Y.The multiple regression analysis revealed that the change of U1-Y had a significant positive effect on SPAS and IAS,and the change of L1-Y also had a significant positive effect on SPAS and MAS.Conclusion:The upper airway dimensions can not be altered during extraction orthodontic treatment,while the changes of incisors are significant associated with the change of the upper airway dimensions.